Selected articles for topic: rfid controller breakout board

→ 9 articles

Check also 1 Videos for this topic

PN532 NFC/RFID Controller Breakout Board v1.6

Home RFID / NFC MiFare NFC Reader Writers PN532 NFC/RFID Controller Breakout Board v1.6

2 of 3

In-Stock:

DEV-01407

$67.50

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort...

QTY:

Description

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...

Date: 2019-04-11 01:11:32
Website: https://www.sgbotic.com

RFID / NFC : Adafruit Industries, Unique & fun DIY ...

Wireless / RFID / NFC

RFID / NFC technology is a great way to interact with projects. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. Because it can read and write tags, you can always just use this for RFID-tag projects. For a good example of how these boards can be used, check out Becky...

Website: https://www.adafruit.com

PN532 NFC/RFID controller breakout board [v1.6] ID: 364 ...

Description-

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require...

Website: https://www.adafruit.com

PN532 NFC/RFID controller breakout board - v1.6 Australia

Shield Wiring | Adafruit PN532 RFID/NFC Breakout and ...

by lady ada

Solder the Headers

The first step is to solder the headers to the shield. Cut the header strip to length and insert the sections (long pins down) into an Arduino. Then place the shield on top and solder each pin.

Using the Adafruit NFC Shield with I2C

The Adafruit NFC shield is designed to be used using the I2C by default. I2C only uses two pins (Analog 4 and 5 which are fixed in hardware and cannot be changed) to communicate and one pin as an 'interrupt' pin (Digital 2 - can be changed however). What is nice about I2C is that it is a 'shared' bus - unlike SPI and TTL serial - so you can put as many sensors as...

Website: https://learn.adafruit.com

Arduino Library | Adafruit PN532 RFID/NFC Breakout and ...

by lady ada

Which Library?

In the past there were two separate Arduino libraries for using the Adafruit NFC boards. �One library supported the breakout over a SPI connection, and the other library supported the breakout or shield over an I2C connection. �However both of these libraries have been merged into a single Arduino library, Adafruit-PN532 .

The Adafruit PN532 library�has the...

Website: https://learn.adafruit.com

UART 125Khz EM4100 RFID Reader Module RDM6300 for Arduino ...

Home / Breakout Boards / UART 125Khz EM4100 RFID Reader Module RDM6300 for Arduino

UART 125Khz EM4100 RFID Reader Module RDM6300 for Arduino

R110.84

Rfid tag reader with external antenna

Out of stock - Join the waitlist to be emailed when this product becomes available

Reviews (0)

Description

RDM6300 125KHz Card Mini-Module is designed for reading code from 125KHz cards, compatible read-only tags and read/write card. It can be applied in...

Website: https://www.botshop.co.za

Arduino RFID Door Lock -Use Arduino for Projects

TIP31A transistor (radio shack/local electronics store $1.50)

Door Lock is from ebay.

Door Fail Secure access control Electric Strike v5 NO $17.50 (kawamall, bay)

Step 2: Build the Arduino controller

The first step to building a RFID door lock with a basic Arduino is to bread board out a basic working arduino. Most Arduino pre-flashed ATMega 168 chips come with the default blink program pre...

Date: 2017-02-20 16:00:56
Website: http://duino4projects.com

RF ID Card & Reader Module - EM18 RF ID Module (125KHZ ...

Pn532 Nfc/rfid Controller Breakout Board

Approx Price: Rs 1,500 / Piece

DESCRIPTIONThe PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work,...

Website: indiamart.com

9 Resources