emulation - Emulate RFID Tag - Arduino Stack Exchange

up vote -1 down vote

I'm almost positive you cant use a RFID Reader to talk to another RFID Reader with the basic libraries and resources we have. You are best just getting an actual tag may it be Mifare classic or another type of RFID Tag.

I'm...

Website: https://arduino.stackexchange.com

Tahoe Designer | HOW TO: Simple Arduino LF RFID Tag Spoofer

This instructable will show how you can use an Arduino and a few simple components (wire coil, transistor, capacitor, resistor) to make a device that can spoof an 125 KHz (low frequency) RFID tag. �This is version 1, so there are many enhancements that can be made, but this version is stupid simple, yet it works. �I did this in a few hours without much previous knowledge of RFID and...

Website: http://tahoedesigner.com

How to emulate an RFID tag with the RC522 - Arduino Stack ...

No. Looking at the datasheet, card emulation is not a feature provided by the RC522.

Another popular chip, the PN532 , does seem to indicate support...

Website: https://arduino.stackexchange.com

Stupid Simple Arduino Based RFID Emulator

First I hold up a real tag to the reader and you can see the serial number starts showing up screen...

Website: youtube.com

Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

View Categories

A perfect tool for any 13.56MHz RFID or NFC application

Overview

The Adafruit NFC shield is the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty...

Website: https://store.arduino.cc

Adafruit PN532 NFC/RFID Controller Shield for Arduino ...

Description-

We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read...

Website: https://www.adafruit.com

Adafruit PN532 NFC/RFID Controller Shield for Arduino ...

Description-

Website: https://www.adafruit.com

Mini PN532 NFC RFID Reader/Writer Module – ktechnics

Mini PN532 NFC RFID Reader/Writer Module

KES�3,500.00

Description

DESCRIPTION

The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC.

This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing),...

Website: https://ktechnics.com

Compact RFID Reader, ID-20LA – Tutorial by Cytron

NOT compatible with MiFare 13.56MHz tag .

Dimensions: 38x40x7mm

Due to 2mm pitch to picth pin spacing at the bottom of the RFID reader, it is difficult for us to use it on standard protoboard or PCB board. Therefore, we have included a small breakout board in the package.�

To utilize the breakout board, proper solder is necessary, and do mind the orientation of breakout board. You can solder...

Date: 2019-03-23 18:09:42
Website: https://tutorial.cytron.io

RFID Reader ID-12LA (125 kHz) - Cooking Hacks

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string...

Website: cooking-hacks.com

10 Resources