USB RFID Readers & RFID tags - Arduino RFID Shield

Home > RFID

RFID

RFID Readers and RFID tags are a super fun technology to use in your DIY and education projects. With the explosion in Arduino popularity adding an Arduino RFID Shield to your projects can easily add wireless tagging of objects and IDs....

Read more


Website: http://www.trossenrobotics.com

Related topics : rfid tag reader arduino / rfid tag reader usb / rfid tag reader diy / rfid tag and reader / rfid tag reader

Uhf Rfid Rfid Reader Module For Arduino Or To Raspberry Pi ...

Air�cooling(no�need�for�out�install�cooling�fin)

Product Picture:�

Company Information

Shenzhen Vanch Intelligent was established in2005, one of the earliest UHF RFID products manufacture and application solutions supplier in China.VANCH products were widely used in City Smart transportation, Electric power system, asset and logistics management, the world's top 500...

Read more


Website: alibaba.com

Diy usb rfid reader TurkHub.net - gstvnet.com

Demonstrating the motorized lock on my home alarm system based on the Raspberry Pi. The lock has been used daily for almost half a year now. The alarm ...

Video

You can build an RFID reader/writer using Arduino Uno project box for less than pound. This step by step instruction is what I follow to make an Arduino box ...

Video

This week we take an RFID reader and attach it to an arduino. We first show you how the RFID reader works by sending in the TAGID on the RFID Tag. Then we ...

Video

How to build an RFID Reader part 1 - Should you use Discrete Components, RFID Reader Chip...

Read more


Website: http://gstvnet.com

Related topics : long range uhf rfid reader module / long range rfid reader module / rfid uhf long range reader / uhf rfid reader module arduino / long range rfid reader arduino

Arduino HF/UHF RFID Reader

I'm looking for a HF/UHF RFID reader I can interface with via Arduino. I've been using 125kHz solutions which, though they work great, just don't have the range I'd like them to.

Ideally, I'd like an RFID reader that can pick up a passive RFID tag that is in a wallet/pocket and within 1-2m, without the user having to present the tag to...

Read more

Date: 2017-03-04 00:15:50
Website: forum.arduino.cc

Related topics : uhf passive rfid tag reader / hf rfid reader arduino / uhf rfid reader arduino / uhf rfid tag reader / rfid active reader passive tag

Arduino Uno Serial Rs232 - musicsbear

0 Comments

Hi Jeremy, I m having a problem in my application with Matlab Gui -Arduino serial communication. I want to receive data from Arduino when a optical encoder sends me.

Is it possible to use an Arduino UNO as a USB to TTL converter for unbricking a Seagate Barracuda 7200.11 Hard Drive. And if it is possible : how to program it.

Topic: Solved Clone arduino Mega 2560 - no serial port...

Read more


Website: http://musicsbear.weebly.com

Arduino Tutorial: RFID Tutorial RC522 with an Arduino Uno ...

Are you interested in an Arduino RFID project? In this video we take a look at the RFID RC522 reader and writer, and we learn how to use it with Arduino. We also use an OLED display to read the UID of the RFID tags. Let's start!

Today we are going to build a very interesting project. For the first time we are going to use RFID tags with Arduino. I have built a simple project which reads the Unique ID (UID) of each RFID tag we place close to the reader and displays it on this OLED display. If the UID of the tag is equal to a predefined...

Read more


Website: youtube.com

Security Access Using RFID Reader - Arduino Project Hub

About this project

What is an RFID reader?

RFID tagging is an ID system that uses small radio frequency identification devices for identification and tracking purposes. An RFID tagging system includes the tag itself, a read/write device, and a host system application for data collection, processing, and transmission.

In simple words an RFID uses electromagnetic fields to transfer data over short distances. RFID is useful to identify people, to make transactions, etc...

You can use an RFID system to open a door. For example, only the person with...

Read more


Website: https://create.arduino.cc

Related topics : rfid security system using arduino / rfid tag reader system / radio frequency identification tags (rfid) / rfid radio frequency identification tags / radio frequency identification rfid systems

Use Arduino and RS232 Shield to interface Integrated UHF ...

Food

Long Range UHF RFID reader (1-6M) (ISO18000-6C EPC G2) integrates

the reader with the antenna. After first powered on, the reader will buzz once to indicate that it starts to work. When there is tag approaching the reader, it will buzz to indicate that it's sending the data. For the same tag, the read interval can be configured. After read, if the same tag is still in the read area,...

Read more

Date: 2015-03-31 16:20:54
Website: http://diyourself.ru

GitHub - Seeed-Studio/RFID_Library: 125Khz RFID library ...

125Khz RFID library for Arduino.

This library only support TTL RS232 serial port.

When read the data from some RFID card, you will get data like 00 91 6f 0b f5.

Example:

your card number: 0009531147 that your data : 00 91 6f 0b f5

Notice, f5 is the check bit

f5 = 00^91^6f^0b

Pins

TX, RX connect to Arduino or Seeeduino

T1, T2 is the Signal port for RFID antenna

W0, W1 is for wiegand protocol, but...

Read more


Website: https://github.com

Arduino RFID Projects - Integrating the Medium

by Robin Sandhu

Updated August 21, 2016

RFID is a popular technology that has found an important home in the world of logistics and supply chain management. A well known business case of RFID in the market is the supply chain of retail giant Walmart, who use RFID extensively to provide automated tracking and management of inventory and shipping.

But RFID has many other applications, and...

Read more


Website: https://www.lifewire.com

Related topics : rfid projects using arduino / arduino rfid shield adafruit / rfid projects arduino / rfid door lock system arduino / arduino rfid shield example

Using the Parallax RFID Reader with an Arduino | Make:

D2 means digital pin number 2.

Step #3:

Next Prev

Toss some code onto the Arduino.

There are MANY different versions of Arduino code for this RFID reader. However, the best code I have seen to date was written by Benjamin Eckel . I have posted his code on my github account for archival purposes. You can get it here .

Now that the RFID reader is talking to your Arduino, you are ready to hack the...

Read more


Website: makezine.com

Related topics : parallax rfid card reader serial arduino / parallax rfid card reader arduino / rfid tag reader arduino / rfid card reader serial arduino / rfid projects using arduino

Using the Parallax RFID Reader with an Arduino | Make:

D2 means digital pin number 2.

Step #3:

Next Prev

Toss some code onto the Arduino.

There are MANY different versions of Arduino code for this RFID reader. However, the best code I have seen to date was written by Benjamin Eckel . I have posted his code on my github account for archival purposes. You can get it here .

Now that the RFID reader is talking to your Arduino, you are ready to hack...

Read more


Website: makezine.com

Related topics : parallax rfid card reader serial arduino / parallax rfid card reader arduino / rfid tag reader arduino / rfid card reader serial arduino / rfid projects using arduino

Arduino-based RFID attendance system - Open Source For You

1.66K 0

Most educational institutions' administrators are concerned about student irregular attendance. Truancies can affect student overall academic performance. The conventional method of taking attendance by calling names or signing on paper is very time consuming and insecure, hence inefficient.�Radio Frequency Identification (RFID)�is an interesting solution in such cases. Arduino based...

Read more


Website: http://opensourceforu.com

Arduino Ethernet Rfid card reader - Arduino Project Hub

A internet enabled arduino rfid tag reader. that for $20 more can open doors. This system was designed to track students at our highschool and we hope the school approves it.

Here is the prototype:

You might be thinking it might take a long time, yatta yatta yatta. Yet this thing only took me about 6 hours (Because I had power issues), but this could take you about 30 minutes to setup like the...

Read more


Website: https://create.arduino.cc

Related topics : rfid reader module arduino / rfid tag reader arduino / rfid door lock system arduino / wireless rfid reader arduino / rfid module arduino

RFIDuino V1.2 - An Arduino RFID Shield with Xbee, buzzer ...

This page is for the RFIDuino V1.2. Visit this guide to see the differences between the Version 1.1 and 1.2 Hardware.

The RFIDuino is an Arduino RFID Shield which makes Arduino RFID projects super easy to build. Just drop the RFIDuino Shield onto your Arduino microcontroller, load our sample code, and you'll be reading tags in no time! Our getting started guide will take you through the process...

Read more


Website: http://www.trossenrobotics.com

Related topics : rfid projects using arduino / arduino rfid shield code / arduino rfid shield 125khz / arduino rfid shield / rfid projects arduino

RFIDuino V1.2 - An Arduino RFID Shield with Xbee, buzzer ...

Reviews ()

This page is for the RFIDuino V1.2. Visit this guide to see the differences between the Version 1.1 and 1.2 Hardware.

The RFIDuino is an Arduino RFID Shield which makes Arduino RFID projects super easy to build. Just drop the RFIDuino Shield onto your Arduino microcontroller, load our sample code, and you'll be reading tags in no time! Our getting started guide will take you through...

Read more


Website: https://www.robotgeek.com

Related topics : rfid projects using arduino / arduino rfid shield code / arduino rfid shield 125khz / arduino rfid shield / rfid projects arduino

Interfacing RFID with Arduino - How to Read RFID Cards

In this tutorial, we are dealing with yet another interfacing technique. This time we are interfacing an RFID Reader which can read RFID Tags to Arduino. RFID is Radio Frequency Identification. An RFID reader is used to read RFID tags (which contain certain unique data stored in a chip). An RFID reader and an RFID tag, both have a coil surrounding them.  When an RFID tag is shown near an RFID...

Read more

Date: 2017-02-15 05:35:58
Website: http://www.circuitstoday.com

Related topics : rfid tag and reader circuit / rfid store data / serial rfid card reader 125khz / rfid card reader serial output / rfid card reader serial arduino

3 Basic Things to Know About Passive UHF RFID Tags [Video]

shrey Tyagi

Sir,

Can u tell me how hex code stored in the IC chip of the RFID Tag is transferred through the Antenna to the RFID Reader.

atlasRFIDstore

This is actually a very complex process, but, in short, here is how it works with passive RFID tags:

The reader (through its antenna) sends a radio signal to the tag, which acts to "energize" the tag. Once the tag is activated, it reflects back to...

Read more


Website: blog.atlasrfidstore.com

3 Basic Things to Know About Passive UHF RFID Tags [Video]

shrey Tyagi

Sir,

Can u tell me how hex code stored in the IC chip of the RFID Tag is transferred through the Antenna to the RFID Reader.

atlasRFIDstore

This is actually a very complex process, but, in short, here is how it works with passive RFID tags:

The reader (through its antenna) sends a radio signal to the tag, which acts to "energize" the tag. Once the tag is activated, it reflects back to...

Read more


Website: blog.atlasrfidstore.com

Related topics : uhf passive rfid tag reader / passive rfid tag and reader / active rfid tag and reader / active rfid tags and readers price / uhf rfid tag reader

Arduino Playground - ID12

Code for the Innovations ID-12 RFID tag reader

This is a piece of code that lets you read out the ID-12 RFID tag reader (sparkfun.com) with an Arduino. The reader uses a 9600 baud serial connection with the Arduino. When uploading the sketch, you need to pull out the RX wire to the reader, otherwise it will disturb the uploading. (Alternatively, alter the sketch, use NewSoftSerial, and also...

Read more


Website: http://playground.arduino.cc

Related topics : rfid tag reader arduino / rfid reader i code / id12 rfid reader / rfid tag and reader / rfid tag reader

Arduino Ethernet Rfid card reader - Arduino Project Hub

About this project

  

Have you ever thought of adding an RFID tags/card security system or monitoring system in your home and/or office. Well if you got here i bet you already looked up how freaken expensive they are ranging from $200 to $2000, TOO MUCH RIGHT!?? Well a friend and I have decided to make a system that would cost under $100 and could do even more than just access a door, so this...

Read more


Website: https://create.arduino.cc

Related topics : rfid door lock system arduino / rfid reader module arduino / rfid tag reader arduino / rfid based security system using arduino / rfid security system using arduino

How to Open Your Garage Door With RFID

Radio Frequency Identification, or RFID, is an exciting technology that has gained popularity in recent years. �It creates the ability to tag something with a very small passive chip that then allows remote reading of the information on that chip. �RFID tags are commonly used for security door swipe cards, identification for lost pets, and more recently near field communication in...

Read more


Website: https://computers.tutsplus.com

Freelance Rfid Jobs Online - Upwork

RFID Lock design and construction

Hourly - Intermediate ($$) - Est. Time: 1 to 3 months, 30+ hrs/week - Posted

RFID<\/span> lock system from an existing prototype. \n- CAD design\n- RFID<\/span> experience \n\nWill offer partnership should project be successful "">

Need someone who is capable of helping design a RFID lock system from an existing prototype. - CAD design - RFID experience Will...

Read more


Website: https://www.upwork.com

RFID Door Lock Shield Quickstart Guide | Freetronics

The RFID Door Lock Shield allows easy connection of an external RFID reader module and an electric door strike to an Arduino.

Power LED. Indicates that 5V is present on the Arduino.

Manual strike release connection. Shorting these pads causes the output to be activated. Useful for an "exit" button to unlock a door from the inside.

Status LED connection. 5V, GND, and one digital output that can be...

Read more


Website: https://www.freetronics.com.au

Arduino Playground - ParallaxRFIDreadwritemodule

Code for using the Arduino with the Parallax RFID reader/writer

This page is specifically for help with interfacing the Arduino with the newer, black read/write RFID modules from Parallax. If you need help with the blue, read-only module, please visit its page .

To learn more about the module itself, click here .

For the sample code below, the wiring should be set up as:

VCC -> +5V (Arduino)

SIN...

Read more


Website: http://playground.arduino.cc

Related topics : parallax rfid read write module / rfid read write module arduino / parallax serial rfid reader / writer module arduino / read write rfid tags / rfid read write module

Arduino Uno with Mifare RFID RC522 - RepRapPro.me

Arduino Uno with Mifare RFID RC522

This is an home made microcontroller with Arduino Uno bootloader and the Mifare RFID reader/writer RC522

I bought alot of cards and tags for this system and i manage to read from them the information but i dont know how to...

Read more

Date: 2017-12-05 14:21:35
Website: https://sites.google.com

Related topics : rfid mifare rc522 arduino / mifare rfid reader arduino / rfid mifare card reader writer / rfid mifare arduino / mifare rc522 rfid card reader

Tutorial of Xbee Based Arduino Cottonwood UHF RFID Reader

Pin 1 of Xbee (VCC) is connected to Arduino Mega's 5V.

Pin 2 of Xbee (DOUT) is connected to Arduino Mega's digital 1, RX.

Pin 3 of Xbee (DIN) is connected to Arduino Mega's digital 0, TX.

Pin 10 of Xbee (GND) is connected to Arduino Mega's ground.

Ground of RFID module is connected to Arduino mega's gound.

RX of RFID module is connected to Arduin mega's�digital 18, TX1.

TX of RFID module is...

Read more


Website: http://learn.linksprite.com

Related topics : uhf rfid reader module arduino / rfid reader module arduino / uhf rfid reader arduino / cottonwood uhf rfid reader module / rfid module arduino

Arduino Tutorials - Chapter 15 - RFID - tronixstuff

��}

}

If you're wondering why we used SoftwareSerial - if you connect the data line from the RFID board to the Arduino's RX pin - you need to remove it when updating sketches, so this is more convenient.

Now start waving RFID cards or tags over the coil. You will find that they need to be parallel over the coil, and not too far away. You can experiment with covering the coil to simulate it...

Read more


Website: http://tronixstuff.com

Related topics : how to read rfid tag / rfid card reader serial arduino / rfid card reader serial output / rfid card reader serial / rfid tag reader arduino

rfid | PlanetArduino

arduino , arduino hacks , arduino mega , arduino nano , Crossword , museum , rfid , Warsaw , ws2812b   No comments  

Give kids some responsible and challenging tasks, and you'd be surprised at the results. The " Anything Goes " exhibit at the National Museum in Warsaw was aimed as a museological and educational experiment. A group of 69 children aged 6-14 was divided into teams responsible for...

Read more


Website: http://www.planetarduino.org

Related topics : rfid hacking arduino / rfid tag reader arduino / tag rfid arduino / rfid arduino / rfid projects arduino

GitHub - miguelbalboa/rfid: Arduino RFID Library for MFRC522

The SDA pin might be labeled SS on some/older MFRC522 boards.

Hardware

There are three hardware components involved:

Micro Controller:

An Arduino or compatible executing the Sketch using this library.

Prices vary from USD 7 for clones, to USD 75 for "starter kits" (which might be a good choice if this is your first exposure to Arduino; check if such kit already includes the Arduino, Reader, and...

Read more


Website: https://github.com

Related topics : rfid tag reader arduino / rfid proximity card reader kit / rfid tag and reader working / rfid tag and reader circuit / rfid tag reader circuit

13.56Mhz USB RFID Reader/Writer Module - emartee.com

Video

13.56Mhz USB RFID Reader/Writer Module

RFID  frequency identification is a non-contact object recognition technology, it can automaticlly recognize target and get relevant data through rf signal, so there are so many interactive projects which need to use RFID to achieve object recognition. Generally speaking, one basic kit of RFID general system mainly consists of three parts :

Tag :...

Read more


Website: emartee.com

Related topics : rfid card reader writer usb / usb rfid reader writer / rfid reader module arduino / high frequency rfid reader module / rfid smart card reader writer

Experimenting with the Adafruit PN532 controller shield ...

Experimenting with the Adafruit PN532 controller shield

About the author

Luis Ibanez - Luis Ibáñez works as Senior Software Engineer at Google Inc in New York city.

Posted 28 Mar 2015 Luis Ibanez Feed

110

Image by : 

opensource.com

RFIDs--we use them every day. With every visit to the supermarket, public library, bookstore, or department store, we handle objects that have an RFID  tag, which...

Read more

Date: 2017-03-04 02:49:18
Website: https://opensource.com

Related topics : read write rfid tags / passive rfid tag read range / rfid tag read range / how to read rfid tag / radio frequency identification tags (rfid)

Monkey the Cat Hunts for Dinner - Ben Millam's Blog

Cat Geek // 07.05.2015 // 99 COMMENTS

Monkey the Cat Hunts for Dinner

July 5, 2015

by Ben Millam 99 Comments

So instead of feeding my cat, I hide these balls around the house...

This all started after I read an explanation of why cats go about repeatedly exploring the same areas: it's partly to establish and survey their territory, but they're also practicing 'mobile' hunting: moving about, being...

Read more

Date: 2017-12-09 21:40:33
Website: http://benjaminmillam.com

Related topics : rfid tag reader arduino / rfid tag and reader circuit / active rfid tag and reader / rfid tag and reader working / rfid tag reader circuit

RFID front door lock - Hackster.io

More photos in the� RFID front door photoset .

One of the things that I love is hardware with beautiful housing. So I attempted to create a wooden housing based on examples of ornately decorated objects that I found. I'm going to be looking at this every day, so I wanted it to be pleasant and not as impersonal as so much technology feels.

Housing

RFIDs / NFC Tags

The system was designed to work...

Read more


Website: https://www.hackster.io

Related topics : rfid front door lock / rfid tag reader arduino / types of rfid tags and readers / rfid door lock arduino / rfid door lock system arduino

Mini PN532 NFC RFID Reader/Writer Module – ktechnics

Mini PN532 NFC RFID Reader/Writer Module

KES�3,500.00

Description

DESCRIPTION

The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC.

This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing),...

Read more


Website: https://ktechnics.com

MFRC522 RFID Reader with Arduino Tutorial | Random Nerd ...

Caution: You must power this device to 3.3V!

Circuit

Reading Data from a RFID tag

After having the circuit ready, go to File > Examples > MFRC522 > DumpInfo and upload the code. This code will be available in your Arduino IDE (after installing the RFID library).

Then, open the serial monitor. You should see something like the figure below:

DOWNLOAD FREE PDF: Arduino eBook with 18+ Projects

Approximate the RFID card or the keychain to the reader. Let the reader and the tag closer until all the information is displayed.

This is...

Read more


Website: randomnerdtutorials.com

Related topics : rfid card reader serial arduino / rfid tag reader arduino / rfid card reader serial / rfid library arduino download / rfid card reader device

MFRC522 RFID Reader with Arduino Tutorial | Random Nerd ...

Caution: You must power this device to 3.3V!

Circuit

Reading Data from a RFID tag

After having the circuit ready, go to File > Examples > MFRC522 > DumpInfo and upload the code. This code will be available in your Arduino IDE (after installing the RFID library).

Then, open the serial monitor. You should see something like the figure below:

DOWNLOAD FREE PDF: Arduino eBook with 18+ Projects

Approximate the RFID card or the keychain to the reader. Let the reader and the tag closer until all the information is displayed.

This is...

Read more


Website: randomnerdtutorials.com

Related topics : rfid card reader serial arduino / rfid tag reader arduino / rfid card reader serial / rfid library arduino download / rfid card reader device

Practical Arduino: RFID Access Control System

RFID Access Control System

RFID technology is used for a wide variety of applications including access control, package identification, warehouse stock control, point of sale scanning, retail anti-theft systems, toll-road passes, surgical instrument inventory, and even identifying individual sheets of paper placed on a desk. RFID tags are embedded in name badges, shipping labels, library books, product tags and boxes, installed in aircraft, hidden inside car keys, and implanted under the skin of animals or even people....

Read more


Website: http://www.practicalarduino.com

Related topics : rfid reader access control system / rfid badge access control / rfid access control / rfid stock control system / rfid inventory control system

Hacking RFID Tags Is Easier Than You Think: Black Hat

That is the conclusion of Francis Brown, managing partner at security firm Bishop Fox, who detailed his research on RFID hacking on July 31 at the Black Hat security conference here. In an interview with eWEEK, Brown said he started out doing his RFID research focused on a specific requirement: He needed to break in to a building.

Although there are multiple types of RFID technologies, the focus...

Read more


Website: http://www.eweek.com

Related topics : rfid based security system using arduino / long range rfid reader arduino / rfid card reader technology / rfid security badges / rfid badge reader

Copying my apt building's RFID tag. : arduino - reddit

by marc2912 mega2560

So my apartment building uses honeywell RFID readers to access elevator and parking garage (home access is still with keys thankfully). They use ridiculously flimsy tags on a keychain that are begging to break off because the plastic is so thin. To top it off they charge $40 for a replacement tag. Good business I guess considering they have...

Read more


Website: https://www.reddit.com

Related topics : rfid tags uses / rfid tag reader arduino / rfid tag and reader working / tag rfid arduino / rfid tag frequency

Cottonwood: UHF Long distance RFID reader module ...

Programming

Arduino sample code for Xbee UHF RFID Reader Tutorial (Arduino issues scan commands)

/* � The circuit: * LCD RS pin to digital pin 12 * LCD Enable pin to digital pin 11 * LCD D4 pin to digital pin 5 * LCD D5 pin to digital pin 4 * LCD D6 pin to digital pin 3 * LCD D7 pin to digital pin 2 * LCD R/W pin to ground * 10K resistor: * ends to +5V and ground * wiper to LCD VO...

Read more

Date: 2017-01-11 09:16:06
Website: http://www.linksprite.com

Related topics : cottonwood uhf long distance rfid reader module / uhf long distance rfid reader module / uhf rfid reader module arduino / cottonwood uhf rfid reader module / uhf rfid reader arduino

Get distance from an RFID Tag [solved] - Arduino Forum

Aug 23, 2016, 10:21 pm Last Edit: Aug 29, 2016, 01:25 pm by Meric

Dear Arduino community,

Hi there,

I've got an IR+RFID guided robot. I have to target many objects in a room, one after the other. All are in a random position. Each one is RFID passive-tagged.

I proceed like that: I target an object with the IR, I reach it, and I check if the target is the right one with an RFID validation.

Now, I would like to validate the objective before to totally reach it �

A way for that is to roughly compare the IR measured distance and the RFID measured distance, and to conclude if the target where we are going is the right one. I even think that compare...

Read more

Date: 2017-12-10 02:33:37
Website: forum.arduino.cc

Related topics : rfid tag distance measurement / rfid reader distance measurement / rfid distance measurement / passive rfid tag distance / rfid signal strength measurement

RFID Security Lock Circuit using Arduino - homemade-circuits.com

In this article we will see how an Arduino based RFID reader circuit could be used for controlling a relay, which in turn could be used in security door lock applications.

By: Girish Radhakrishnan

Introduction

If you haven't yet checked the previous RFID article, please go ahead check it out, it covered the basics of RFID technology .

We are going to identify the authorized tags using UID. In a...

Read more


Website: https://www.homemade-circuits.com

Related topics : rfid based security system using arduino / rfid door lock system circuit / rfid security system using arduino / rfid card reader circuit / rfid tag and reader circuit

SimplyGold - nikhedonia.com

Getting Started with RFID by Tom Igoe; O'Reilly Media

Getting Started with RFID 1 is a very short "book" on RFID (Radio Frequency Identification), a way to tag and identify objects over varying ranges, and how to use Arduino to create a few interesting RFID projects. The book assumes that you have some experience with Arduino and micro-controllers (i.e., do you know what a breadboard, jumper wires, and circuits are?).

We start with a very brief introduction to RFID, follow up with two introductory technical tutorials...

Read more


Website: http://nikhedonia.com

Related topics : radio frequency identification tags (rfid) / rfid radio frequency identification tags / rfid key fob reader / rfid tag key fob / rfid book tags

IoT RFID Reader

A simple RFID reader which sends token information into AWS IoT service. This information can later be used to authorize starting/stopping of a service like a network connected home security system.

This implementation uses RC522 modules and pretty...

Read more


Website: youtube.com

Related topics : home security system using rfid / iot rfid reader / rfid security system using arduino / rfid projects using arduino / security system using rfid

rfid - how to detect 125khz tags with mfrc 522 - Arduino ...

up vote 0 down vote

You can buy a 125 kHz reader from eBay for around $7. I got one like this:

You can communicate with it (listen to it) with a single serial...

Read more


Website: https://arduino.stackexchange.com

Related topics : 125 khz rfid tag reader / 125 khz rfid tag / rfid tag and reader working / 125khz rfid tag reader / rfid 125 khz arduino

RFID RC522 Gate Access Control with Arduino | 14Core.com

In this illustration we will going to wire the RFID (Radio Frequency Identification) Module RC522 in this module it uses a radio signals and a Radio Label Tags for reading and writing data.

How Servo works please refer to this link.

The most common way of using RFID is the identification or a products, where tag can contain information such as product code, the origin, expiration date, and the...

Read more


Website: http://www.14core.com

Related topics : rfid gate access control / rfid card reader serial arduino / radio frequency identification tags (rfid) / rfid radio frequency identification tags / rfid mifare rc522 module arduino

RC522 RFID Card Reader/Detector Module Kit, 13.56Mhz ...

RC522 RFID Card Reader/Detector Module Kit, 13.56Mhz

RC522 RFID Card Reader/Detector Module Kit, 13.56Mhz

Rated 4.75 out of 5 based on 8 customer ratings

Features: 13.56Mhz, S50, Mifare One

RC522 IC Brief Introduction

MF RC522 is used in highly integrated 13.56MHz contactless communication card chip to read and write, of NXP for "three" and the application launched a low voltage, low cost, small...

Read more


Website: http://www.electrodragon.com

Köp MiFare Classic (13.56MHz RFID/NFC) Card - 1KB (359 ...

Omdömen (0)

Produktbeskrivning

This is a blank MiFare Classic card - often used for train/bus passes but also found in other systems where a proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few...

Read more


Website: https://www.m.nu

Related topics : arduino rfid shield adafruit / nfc rfid card reader / nfc rfid arduino / nfc rfid reader writer / mifare classic rfid cards

RFID Reader ID-12LA (125 kHz) - Cooking Hacks

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string...

Read more


Website: cooking-hacks.com

Related topics : radio frequency identification tags (rfid) / rfid radio frequency identification tags / radio frequency identification rfid systems / radio frequency identification (rfid) / rfid 125 card reader serial output