Selected videos for topic: rfid tag antenna

→ 101 Videos

Check also 1015 Articles for this topic

RFID DEMPA (RADIO WAVE) CHECKER CARD DEMO

Video of the demo of DEMPA (radio wave) CHECKER CARD with LED mounted on the card. The LED lights up when the card detected UHF radio emission of an effective power level from the antenna of RFID tag reader (interrogator) . The DEMPA CHECKER CARD is a friend of engineers who are responsible for installation and maintenance of the UHF RFID readers and antennas. It tells the engineers whether the antenna is hot or not working, how long and how often the antenna emit the radio, relative power...

From: RFIDalliance

6mm Thin Antenna Allows New Era of RFID Applications: Host Louis Sirico

voir la vidéo

It's 6mm thick, can be placed on any surface, cut to any length, can have a cart pushed over it, works with any C1G2 tag, and has an evanescent antenna pattern which reads RFID tags directly above it. In this edition, we test the evolutionary, new ultra-thin UHF RFID antenna... Host: Louis Sirico

From: Louis Sirico

Back top

Designing an RFID Tag Detector and Antenna in ADS

voir la vidéo

Key aspects of RFID Passive tag design.

For more information: http://www.keysight.com/find/eesof-ads

For a free evaluation copy of ADS: http://www.keysight.com/find/eesof-ads-latest-downloads

From: Keysight EEsof EDA

Related topics : rfid tag antenna design / rfid tag detector

Back top

RFID Hand-Held Inventory System

voir la vidéo

Bulk identification of products and short scanning time are two of the prime advantages of using RFID tags, instead of bar code labels, An RFID tag can either be active or passive. An RFID tagged product, may either be passed through a reader or scanner. The tag reading process, begins with the RFID antenna, sending a scanning signal which activates the transponder in a tag to respond. An RFID reader consists of a scanning antenna that are attached to computers, which can receive signals from...

From: TMSolutionsUAE

Back top

Smart Apparel System using LINOTAG - Yarn based Apparel RFID Tag

voir la vidéo

LINOTAG is a UHF RFID tag for apparel tagging in which its antenna is designed using yard which is suitable to be sewn directly into fabric. The tag also passed needle detector test, which means suitable to be embedded during manufacturing process.

The reading distance is about 11m (on air) and it is also suitable to be used as laundry tag with sustainable environment up to 250deg Celsius and 60 bar pressure.

From: MDT INNOVATIONS, The IoT Enabler

Back top

Using 2x12mm glass Mifare S50 NFC tags with NFC readers

voir la vidéo

This video explains how to get a reliable read with a 2x12mm glass NFC compatible RFID tag using a reader with a "flat plane" antenna loop. The antenna coil in the tag is arranged as a cylinder while the antenna coils of most readers are flatted out on a plane. Getting the small tags to energize and interact with these types of readers requires some trial and error, but it is possible to learn how to get a consistent read almost every time you present the tag to the reader.

The 2x12mm Mifare...

From: Amal Graafstra

Back top