Selected articles for topic: rfid tag id length

→ 80 articles

Check also 1 Videos for this topic

My experiences with RFID - QtuTrains

Tagging some or all rolling stock is very tempting for many reasons.

As a train passes over a tag reader the controller can:

See the makeup of the train

Know which loco is/are pulling the train.

Know calibration data for how the loco behaves

Deduce the class of the train and how it should be handled.

Know how fast the train should travel.

Calculate the length of the train if all rolling...

Website: http://www.qtutrains.com

ICEGEN | Patient Tracking Solution – ‘Patient Mantra’ for ...

Patient Tracking Solution - 'Patient Mantra' for Apollo Hospitals - RTLS/RFID based

Apollo Hospitals Chennai, India's largest health-care facility, is employing an Icegen Real-time locating system (RTLS/RFID) called "Patient Mantra" to move 250 patients a day through a series of up to 26 diagnostic procedures....

Website: http://icegen.net

Understanding the confusing world of RFID tags and readers ...

Understanding the confusing world of RFID tags and readers in access control

Wiegand, 120 kHZ, UHF, EPC, microwave, MIFARE, RS232, RS485, clock and data, AES, facility codes, client codes: The world of access control and vehicle identification is literally filled with concepts, techniques, acronyms and words that people...

Website: http://www.nedapidentification.com

RFID Protocols - enigmatic-consulting.com

The RF in RFID: physical layer operation of passive UHF tags and readers

Daniel M. Dobkin

(revised Dec 2012)

6. RFID Protocols

A communications protocol is a way of organizing the conversation between devices -- in the case of RFID, between tags and a reader -- to ensure that information actually gets transferred. A protocol defines:

an air interface: what sort of modulation of the reader signal...

Date: 2016-12-31 04:10:33
Website: http://www.enigmatic-consulting.com

Figure 1 from Attacking an AES-Enabled NFC Tag ...

Compact RFID Reader, ID-20LA – Tutorial by Cytron

NOT compatible with MiFare 13.56MHz tag .

Dimensions: 38x40x7mm

Due to 2mm pitch to picth pin spacing at the bottom of the RFID reader, it is difficult for us to use it on standard protoboard or PCB board. Therefore, we have included a small breakout board in the package.�

To utilize the breakout board, proper solder is necessary, and do mind the orientation of breakout board. You can solder...

Date: 2019-03-23 18:09:42
Website: https://tutorial.cytron.io

Unitech RP901 Wireless Bluetooth UHF / RFID Pocket Reader

The Unitech RP901 is a compact, light-weight and pocket-sized UHF RFID reader. It is designed and engineered specifically to suit the UHF reading market and application requirements of mobile workers.

Pair the RP901 with your iOS, Android or Windows mobile device via the Bluetooth connection and easily extend your mobile data collection with this UHF RFID reader.

RFID technology

Radio...

Website: https://www.ers-online.co.uk

how does rfid work and can you use it to measure distance

This answer was rated:

Share this conversation

Expert: GemB replied 10 years ago.

Radio frequency Identification or RFID systems are smart versions of the UPC bar codes. They consist of a scanning antenna which put out radio-frequency signals, a transponder or tag attached to the goods to be identified, a transceiver with a decoder to...

Website: http://www.justanswer.com

Zebra Technologies - Solving R110Xi4 Tag Errors - VOIDS or ...

R110Xi4 RFID Setup and Best Practices

Applies To

R110Xi4

Details

There are no Transponder Placement / Power Guidelines for the R110Xi4 as it has the below features:-

�

Adaptive Encoding Technology automatically selects optimum encode settings

Variable inlay placement supports a range of inlay positions for maximum media flexibility by automatically sensing inlay position to optimize...

Website: https://km.zebra.com

AVOIDING DEAD SPOTS AND OPTIMIZING NEAR-FIELD UHF RFID ...

AVOIDING DEAD SPOTS AND OPTIMIZING NEAR-FIELD UHF RFID READING

16 July 2013

The size of the tags is not the only difference between far-field and near-field RFID technology. This article aims to look closer at how parameters and antennas can be modified to optimize the reading performance of near-field tags.

Author: Toni Heijari

You can roughly divide UHF RFID into two categories based on the...

Website: http://rfidarena.com

Wal-Mart To Track Clothing With RFID Tags - IEEE Spectrum

The Wall Street Journal reported last week that Wal-Mart is planning to test the placement of RFID tags on individual clothes beginning in August. Once in place, Wal-Mart workers will then be able to use a hand-held scanner to check what size clothing may need to be restocked on the floor shelves as well as to keep an eye on a store's backroom clothing inventory, which the WSJ story implies,...

Website: http://spectrum.ieee.org

AeroScout T5 Sensor Wi-Fi Active RFID Tags for Condition ...

iSCAN301 1D and 2D fixed reader

T5 Sensor Tag Range

The T5 range of sensor tags add condition monitoring capabilities to the market-leading AeroScout solutions provided by Extronics. Leverage the Wi-Fi infrastructure to accurately monitor voltage, temperature, and humidity to improve operations, quality, and regulatory compliance.

Wi-Fi based solutions for condition monitoring: temperature,...

Website: http://www.extronics.com

HF Mifare 1k and UHF ALIEN H3 Dual Frequency Card/ RFID ...

HF Mifare 1k and UHF ALIEN H3 Dual Frequency Card/ RFID combi smart card

D.O RFID Tag Manufacturer offer extensive options-customers choose to embed a single IC or select up to three chip in a card:including LF, HF, UHF.contact technologies including smart card controllers, and magnetic stripe can also be incorporated in these standard

ISO size cards for universal compatibilit y in card printerencoders.they are manufacture using

direct chip...

Website: dorfidtag.com

RFID Tags - eAgile Inc.

ISO 9001:2008 Quality Management System

All Frequencies (UHF, HF/NFC, LF)

Variable Data (Serialization, Text and Barcodes)

100% Inspection

Let eAgile make RFID easy for your organization.

Use the form below for more information

Name (required)

Message

Which RFID frequency fits your needs?

RFID transponders (RFID chip and antenna) are available in different frequencies and selection is dependent...

Website: https://www.eagile.com

With radio tags from Oct 31, you won’t have to stop to pay ...

With radio tags from Oct 31, you won't have to stop to pay at highway toll booths

A vehicle installed with Radio Frequency Identification also called FastTags that can be recharged once the balance is zero, will be able to drive past a toll plaza without having to stop and pay the toll.

india Updated: Sep 18, 2017 16:53 IST

New Delhi, Hindustan Times

Long queues at the Kherki Daula toll plaza in...

Date: 2017-11-24 13:36:52
Website: http://www.hindustantimes.com

Chapter 13: Inventory Management Flashcards | Quizlet

A stock or store of goods.

Independent-demand item

An item that is ready to be sold or used

Dependent-demand item

Components of finished products, rather than the finished products themselves

Return on investment (ROI)

Profit after taxes divided by total assets.

The different kinds of inventories include the following:

Raw materials and purchased parts.

Partially completed goods, called...

Website: https://quizlet.com

Library domain model UML class diagram example describes ...

Library Domain Model

UML Class Diagram Example

Library Domain Model describes main classes and relationships which could be used during analysis phase to better understand domain area for Integrated Library System (ILS), also known as a Library Management System (LMS).

Each physical library item - book, tape cassette, CD, DVD, etc. could have its own item number. To support it, the items may be...

Date: 2016-07-30 19:00:00
Website: http://www.uml-diagrams.org

Zebra Technologies - RFID Error - Solving VOIDS and Best ...

Solving Voids and Improper RFID Tag Encoding�ZT Series Printers

Applies To

ZT Series RFID Printers

Procedure

1.�Is the printer calibrated to your Label's length? �The default of the RFID printers at Media Power Up and Head Close is Feed so the printer may not properly calibrate your media's length. �On standard printers it is Calibration. � Perform a Media/Ribbon Cal (this is a full media calibration)�to ensure that the media is properly calibrated to the appropriate label length. �This is the most vital step to correcting voids as if the calibrated label length is incorrect, the program position will be incorrect as well and cause...

Website: https://km.zebra.com

Design of a slotted chipless RFID humidity sensor tag ...

The proposed sensor tag does not need any silicon chip and can be fabricated in printing technology, which resulting in its untra-low cost.

The proposed sensor tag can work on passive mode, which is especially suitable for long-term monitoring application.

The proposed sensor tag shows good sensitivity and consistency performances.

Abstract

This paper proposes a chipless Radio-Frequency...

Date: 2018-01-12 12:10:33
Website: https://www.sciencedirect.com

Monkey the Cat Hunts for Dinner - Ben Millam's Blog

Cat Geek // 07.05.2015 // 99 COMMENTS

Monkey the Cat Hunts for Dinner

July 5, 2015

by Ben Millam 99 Comments

So instead of feeding my cat, I hide these balls around the house...

This all started after I read an explanation of why cats go about repeatedly exploring the same areas: it's partly to establish and survey their territory, but they're also practicing 'mobile' hunting: moving about, being...

Date: 2017-12-09 21:40:33
Website: http://benjaminmillam.com

Sensitivity and Impedance Measurements on UHF RFID ...

1. Sensitivity and Impedance Measurements on UHF RFID Transponder Chips Lukas W. Mayer and Arpad L. Scholtz Vienna University of Technology Institute of Communications and Radio-Frequency Engineering Gusshausstrasse 25/389, 1040 Wien,...

Website: de.slideshare.net

Indentify RFID tag 13 bytes length (beginner)

� if (Serial2.available())� � � � � � � // if date is comming from softwareserial port ==> data is comming from SoftSerial shield

� {

� � while(Serial2.available())� � � � � // reading data into char array

� � {

� � � buffer[count++]=Serial2.read();� � �// writing data into array

� � � if(count == 64)break;

� � Serial.write(buffer,count);� � �// if no data transmission ends, write buffer to hardware serial port

� � clearBufferArray();� � � � � � � // call...

Date: 2019-04-10 23:27:57
Website: forum.arduino.cc

Related topics : read write rfid tags / rfid tag id length

Imatis - Visi Resource and Process System (RPS)

- Sensor and medical device management

- Building Visi applications

- Share with any device

- Integrations and accessing data from silos

An IMATIS Visi electronic whiteboard is a collaborative tool, which combines logistics with resource and patient management. The combination simplifies the design and management of efficient and...

Date: 2017-11-30 16:43:05
Website: http://www.imatis.com

How to Print RFID Labels - msdn.microsoft.com

You can use BizTalk RFID to print RFID labels on RFID printers. The data for RFID labels to be printed can be provided manually or by an external data source. In the current version of BizTalk RFID, Microsoft Excel (for example, an .xls file) is the only supported external data source.

The RFID Print Label Wizard is displayed only if the device meets all of the following criteria:

Is in the...

Website: https://msdn.microsoft.com

c# - Trouble with RFID - reading program - Stack Overflow

up vote 1 down vote favorite

I am new to programming RFID - readers. I have Motorola MC9090G1, my task - read RFID - tag and write it down in the list. In Motorola EMDK for .NET is an example of that is my goal. But the problem is that the addition to the list of tags is not instant and a significant delay (15-30sec). How to fix it?

Here is the code:

/// The main entry point for the...

Website: stackoverflow.com

M/A-COM Introduces DoT RFID Portals and Antennas

M/A-COM Technology Solutions Inc., a provider of innovative microwave and RF design solutions and products, announced the availability of a new floor-mounted RFID portal capable of detecting the direction of travel (DoT) of RFID-tagged items.

"Given today's evolving security and supply chain management landscape, it is not enough that an RFID portal simply registers a tagged item within its...

Website: http://www.microwavejournal.com

ISYS Chapter 7 Terms Flashcards | Quizlet

Occurs when a company places active or semi-passive RFID tags on expensive products or assets to gather data on the items' location with little or no manual intervention

Attenuation

Represents the loss of a network signal strength measured in decibels (dB) and occurs because the transmissions gradually dissipate in strength over longer distances or because of radio interference or physical...

Website: https://quizlet.com

EPC Encoder/Decoder – GS1 US

EPC Encoder/Decoder

Run real-time translations

The Electronic Product Code (EPC®) is an identification structure for physical objects, including trade items, logistics units, locations, documents, and other physical assets. The EPC is designed to be used in a variety of ways, and different forms of the EPC exist to serve those needs.

The EPC Encoder/Decoder is an interactive application that...

Website: https://www.gs1us.org

Select the Right Oscilloscope Probe for Your Application ...

An oscilloscope probe is a fundamental part of an analog measurement system. Without an appropriate probe the best oscilloscope is useless. For that reason it is essential to choose the right probe to connect the circuit under test to your oscilloscope. Before choosing a probe, it is important to understand how probes work and how they are specified. Attenuation ratio, bandwidth, impedance, and...

Website: http://www.ni.com

EPC Information - EPC-RFIDEPC-RFID

EPC Information

An Electronic Product Code (EPC) is a universal identifier that gives a unique identity to a specific physical object. This identity is designed to be unique among all physical objects and all categories of physical objects in the world, for all time. In most instances, EPCs are encoded on RFID tags which can be used to track all kinds of objects including: trade items, fixed...

Website: http://www.epc-rfid.info

51 - 80 of 80 Articles

Page : First | < Preceding | Next > | Last

0 | 1