james wolf
Rank: 333 / 1333
3 selected videos
Arduino RFID Tag Reader using BM019
This is a small prototype project I did for a buddy that needed to verify injection molded parts contained working RFID tags when leaving the assembly line. The arduino polled for an RFID tag and lights the yellow LED when an active (working) RFID tag passed.
My github repo for this project is here:
https://github.com/contractorwolf/RFID-Reader
Related topics : rfid tag reader arduino / active rfid tag arduino / small active rfid tags
RFID tester with object detection using Arduino Uno (vid1)
These are film spools (white plastic) that have an RFID tag. The spinning table simulated the conveyor belt in the factory that will pass the spools past the sensor. The sensor will detect the object and test it for a functioning RFID tag. If the tag is successfully read, the blue light will turn on and the gate relay will be opened (simulated with the voltmeter continuance test). If the object is tested without sensing the RFID tag, the red light will light and the gate will remain shut.
Related topics : rfid tag test / tag rfid arduino / rfid tag uses / rfid tag sensor
RFID tester with object detection using Arduino Uno (vid2)
These are film spools (white plastic) that have an RFID tag. The spinning table simulated the conveyor belt in the factory that will pass the spools past the sensor. The sensor will detect the object and test it for a functioning RFID tag. If the tag is successfully read, the blue light will turn on and the gate relay will be opened (simulated with the voltmeter continuance test). If the object is tested without sensing the RFID tag, the red light will light and the gate will remain shut.
Related topics : rfid tag test / tag rfid arduino / rfid tag uses / rfid tag sensor
3 Resources