Selected articles for topic: mifare rfid reader module

→ 75 articles

Check also 7 Videos for this topic

RFID Controller Modules - novotek.rs

RFID controller is a board which is a master board to RFID antenna, or in other words the functions of reading and writing RFID tags. A controller on the board can also have a function of an encoder or decoder of the data which are put on the RFID tag. A 128-bit AES verification function of a tag at the readers level is performed in this way. Supports standard MiFare cards.

Specification:

o RS232 interface, supports 300 to 115,200 baud rate

o Power supply 5VDC or 12VDC, up to 100mA

o Provide 2 relay outputs for external devices

o AVR Atmega chip...

Website: http://www.novotek.rs

PN532 NFC RFID module V3 kits -- NFC with Android phone ...

Date Added: Tuesday 05 November, 2013

Add to Cart:

Fight copy version in the market

Overview

NFC is a popular technology in recent years. We often heard this work while smart phone company such as Samsung or HTC introduces their latest high-end phones. Almost all the high-end phone in the market support NFC.

Near field communication (NFC) is a set of standards for smart phones and similar devices...

Website: http://www.elechouse.com

InfoSec Resources - Introduction to RFID Security

Practice for certification success with the Skillset library of over 100,000 practice test questions . We analyze your responses and can determine when you are ready to sit for the test.

1. Introduction

Radio Frequency Identification, also known as RFID, is a technology that was created by Léon Theremin in1945 and later patented by Mario Cardullo in 1973. It was first developed by Léon Theremin...

Website: http://resources.infosecinstitute.com

Mifare RC522 Module RFID Reader - Wiki

MF RC522 is a highly integrated read and write card chip applied to the 13.56MHz contactless communication. Launched by the NXP Company, it is a low-voltage, low-cost, and small-sized non-contact card chip, a best choice for intelligent instrument and portable handheld devices.

The MF RC522 uses advanced modulation and demodulation concept which fully presented...

Date: 2017-03-20 07:24:00
Website: http://wiki.sunfounder.cc

PN532 - NFC RFID Module User Guide - DataSheetGo.com

Image :

The texts in the PDF file :

www.elechouse.com PN532 NFC RFID Module User Guide Version 3 Introduction NFC is a popular technology in recent years. We often heard this word while smart phone company such as Samsung or HTC introduces their latest high-end phones. Almost all the high-end phones in the market support NFC. Near field communication (NFC) is a set of standards for smartphones...

Website: http://www.datasheetgo.com

13.56MHZ RFID Reader/Writer Module - Elechouse

Date Added: Saturday 12 November, 2011

Add to Cart:

Product Description:

Introduction

This RFID module is desgined based on MFRC522. It is a highly integrated reader/writer for contactless communication at 13.56MHz. It supports ISO 14443A/MIFARE...

Website: http://www.elechouse.com

SkyeModule™ M2 HF RFID Reader Module - JADAK

SkyeModule[TM] M2 (HF)

The�SkyeModule[TM] M2 is the industry's most secure multi-protocol embedded HF RFID reader module for OEMs and�was designed specifically for encrypted authentication across a range of vertical markets.

Based on the same security standards�used by the U.S. Department of Defense and financial sector, the SkyeModule�M2 provides�rich HF...

Website: jadaktech.com

RFID Front Door Lock using Netduino | robdobson.com

RFID Front Door Lock using Netduino

2013-Dec-22 UPDATE ...

I've found that there are some failure modes for the networking on the Netduino that allow the watchdog to keep being reset. So I've gone a step further and now the door controller has to be "pinged" by an external server on a regular basis to keep it alive - otherwise it resets itself every 10 minutes....

Website: http://robdobson.com

13.56MHZ RFID Reader/Writer Module V4-- Ultralight ...

White PVC card, only read tag ID

Command formate of this version is completely compatible with old version.

This RFID module is desgined based on MFRC522. It is a highly integrated reader/writer for contactless communication...

Website: http://www.elechouse.com

PN532 NFC RFID V3 module - Netram Technologies

PN532 NFC RFID V3 module

Reference:

Warning: Last items in stock!

Availability date:

The minimum purchase order quantity for the product is 1

Add to cart

More info

NFC is one of the most popular technologies in recent years. Almost all the high-end cellphones in the market supports NFC.

Near field communication (NFC) is a set of standards for smart phones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity of each other, usually no more than a few centimeters.

This module is built around NXP PN532 & NXP PN532 and is very popular in the...

Website: https://www.netram.co.za

RFID RC522 Gate Access Control with Arduino | 14Core.com

In this illustration we will going to wire the RFID (Radio Frequency Identification) Module RC522 in this module it uses a radio signals and a Radio Label Tags for reading and writing data.

How Servo works please refer to this link.

The most common way of using RFID is the identification or a products, where tag can contain information such as product code, the origin, expiration date, and the...

Website: http://www.14core.com

RFID and Keypad Based Access Control System using Arduino

In the previous post, we made an RFID based access control and alert system using Arduino in which system sends us messages when the access was granted or denied. We was also be able to open the door lock and halt the system by sending the message to Arduino. There was a master tag that was used to add/remove other tags.

In this post, we...

Website: https://electronicshobbyists.com

Mifare RFID Reader/Writer 13.56MHz RC522 SPI [3901 ...

NXP MFRC522 Datasheet

Mifare RC522 is the high integrated RFID card reader which works on non-contact 13.56mhz communication, is designed by NXP as a low power consumption, low cost and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

MF RC522 use the advanced modulation system, fully integrated at 13.56MHz with all kinds of...

Website: sunrom.com

Writing to Mifare RFID tags | code, circuits, & construction

Mifare RFID tags, like other RFID tags, contain a serial number that can be read using an RFID reader, but they also have a limited amount of memory space that you can write data to, and read back from.� This can be handy if you want to do something like keep a user's account balance or name directly on the RFID tag.

This tutorial shows a number of the functions of my sonMicroReader� library...

Website: tigoe.com

RFID reader for iPhone LetsGo Mobile

mail it!

iPhone�NFC phone

The iCarte is ideal for Apple iPhone users who want to use their iPhone for fast and secure contactless payments, transit payments, loyalty rewards, checking balances, top-up pre-paid credit, discovering new services from smart posters or kiosks and exchanging information with other NFC phones.

�

iCarte RFID reader for iPhone

In addition to NFC and peer to peer communication capabilities, the iCarte supports multiple RFID protocol read and write functions. RFID tag information can be read and written by the iCarte and communicated in real-time to...

Website: http://www.letsgomobile.org

RC522 RFID Module (Blue), Arduino Compatible

Get creative with your friends and families

RC522 IC Brief Introduction.

MF RC522 is a highly integrated read/write IC for contactless communication on 13.56MHz. card chip to read and write, of NXP for "three" and the application launched a low voltage, low cost, small size, non-contact card chip to read and write, intelligent instruments and portable handheld devices developed better.

The MF...

Website: https://hyperion-world.com

RF ID Card & Reader Module - EM18 RF ID Module (125KHZ ...

Pn532 Nfc/rfid Controller Breakout Board

Approx Price: Rs 1,500 / Piece

DESCRIPTIONThe PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work,...

Website: indiamart.com

Access Control, SmartCard and RFID Proximity Readers

Card ISO-Thin, Imageable HID Proximity Access Card

Offers proximity technology with photo identification capability on a single card

Card Choices

Printable label for ProxCard II Clamshell Card

Adhesive backed, printable label, cut to fit ProxCard II. Model Part Number: 1324

1336 DuoProx II

Card ISO-Thin, Imageable HID Proximity Card with Magnetic...

Date: 2016-02-02 01:00:07
Website: http://rfidaccesscontrol.com

SunFounder Mifare RC522 Card Read Antenna RF Module RFID ...

IRQ- Don't Attach to rpi

I used : http://bsd.ee/~hadara/blog/?p=1017&cpage=1#comment-845

and it was extremely helpful.

Hope this helps others:

I am giving this a 3.5, mainly because of the lack of documentation for both the arduino, although a box.com file link is in the description, it isn't quite helpful. Not to mention NO information for Rpi.

5.0 out of 5 starsUsed with Adafruit ESP8266 Huzzah Feather

ByA. Hammondon December 26, 2017 - Published on Amazon.com

Verified Purchase

I got this working with Adafruit ESP8266 Huzzah Feather. Works great! Very decent range (2.5 inches or so with Mifare Ultralight tags), better than I...

Date: 2017-03-22 20:55:20
Website: https://www.amazon.ca

Dealers Of ID Card Printer, Time Attendance System, Access ...

Welcome to Wipaq

ID Card printers / Badge printing systems

Wipaq is an authorized distributor / dealer / agent and service center selling digital Photo Identity card printers from the most reliable names in the business of id card printer in Dubai UAE. Polaroid, Fargo, Zebra, Javelin are some of our most popular, reliable and quality driven names.�W...

+more

Wipaq is an authorized distributor /...

Website: http://www.wipaq.com

RFID Smart Card - 125MHZ RFID Card Manufacturer from Chennai

Model

Any

MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1...

Website: indiamart.com

GitHub - miguelbalboa/rfid: Arduino RFID Library for MFRC522

The SDA pin might be labeled SS on some/older MFRC522 boards.

Hardware

There are three hardware components involved:

Micro Controller:

An Arduino or compatible executing the Sketch using this library.

Prices vary from USD 7 for clones, to USD 75 for "starter kits" (which might be a good choice if this is your first exposure to Arduino; check if such kit already includes the Arduino, Reader, and...

Website: https://github.com

How RFID Works and How To Make an Arduino based RFID Door Lock

Breadboard and Jump Wires .................� Amazon �/ Banggood

Proximity Sensor CNY70 ........................ Amazon

*Please note: These are�affiliate links. I�may make a commission if you buy the components through these�links.�I would appreciate your support in this way!

The project has the following workflow: First we have to set a master tag and then the system goes into normal...

Website: howtomechatronics.com

http://howtomechatronics.com/tutorials/arduino/rfid-works-make-arduino-based-rfid-door-lock/

Arduino Board ............................................� Amazon

Breadboard and Jump Wires .................... Amazon

*Please note: These are�affiliate links. I�may make a commission if you buy the components through these�links.

I would appreciate your support in this way!

The project has the following workflow: First we have to set a master tag and then the system goes into normal...

Date: 2018-01-12 09:12:36
Website: howtomechatronics.com

ACR122u RFID reader and writer - Advanced Card Systems Ltd.

The ACR122U NFC Reader is a PC-linked contactless smart card reader/writer developed based on 13.56 MHz Contactless (RFID) Technology. Compliant with the ISO/IEC18092 standard for Near Field Communication (NFC), it supports not only MIFARE® and ISO 14443 A and B cards, but also all four types of NFC tags.

ACR122U is compliant with both CCID and PC/SC. Thus, it is a plug-and-play USB device...

Website: acs.com.hk

51 - 75 of 75 Articles

Page : First | < Preceding | Next > | Last

0 | 1

RFID Controller Modules - novotek.rs

PN532 NFC RFID module V3 kits -- NFC with Android phone ...

InfoSec Resources - Introduction to RFID Security

Mifare RC522 Module RFID Reader - Wiki

PN532 - NFC RFID Module User Guide - DataSheetGo.com

13.56MHZ RFID Reader/Writer Module - Elechouse

SkyeModule™ M2 HF RFID Reader Module - JADAK

RFID Front Door Lock using Netduino | robdobson.com

13.56MHZ RFID Reader/Writer Module V4-- Ultralight ...

PN532 NFC RFID V3 module - Netram Technologies

RFID RC522 Gate Access Control with Arduino | 14Core.com

RFID and Keypad Based Access Control System using Arduino

Mifare RFID Reader/Writer 13.56MHz RC522 SPI [3901 ...

Writing to Mifare RFID tags | code, circuits, & construction

RFID reader for iPhone LetsGo Mobile

RC522 RFID Module (Blue), Arduino Compatible

RF ID Card & Reader Module - EM18 RF ID Module (125KHZ ...

Access Control, SmartCard and RFID Proximity Readers

SunFounder Mifare RC522 Card Read Antenna RF Module RFID ...

Dealers Of ID Card Printer, Time Attendance System, Access ...

RFID Smart Card - 125MHZ RFID Card Manufacturer from Chennai

GitHub - miguelbalboa/rfid: Arduino RFID Library for MFRC522

How RFID Works and How To Make an Arduino based RFID Door Lock

http://howtomechatronics.com/tutorials/arduino/rfid-works-make-arduino-based-rfid-door-lock/

ACR122u RFID reader and writer - Advanced Card Systems Ltd.

Related topics