Main topics about rfid 125 khz antenna

rfid 125 khz antenna design  •  rfid 125 khz antenna amplifier  •  rfid 125 khz antenna diy  • 

Check also videos for this topic

R3-2 125 KHz Low Frequency Readers up to 3 feet - RFID, Inc.

125 KHz Low Frequency Readers

Our R32 line of 125 KHz RFID Readers continues to be by far the most advanced LF hardware on the market since its debut in 2002. Termed "Smart Antennas", these RFID Readers are designed for factory floor identification applications requiring Robust, Rugged, Rapid data capture (hence the R3). RFID Readers operate both...  [more...]

51 Articles (and 1 Videos) for this topic

 

125 kHz RFID tag reader uses FSK to reduce collisions ...

The RFID (radio-frequency identification) system consists of an RFID tag, a reader, and a user-interface computer. The passive RFID tag contains a silicon chip and an LC antenna circuit. The passive tag is energized by an RF field that's transmitted by the reader (interrogation). Therefore, the tag doesn't require any batteries for its operation.

Passive RFID tags are used for animal tagging,...  [more...]

8 Articles for this topic

Diy rfid reader antenna TurkHub.net

GAO RFID's UHF 860-960 MHz 4 Port Long Range RFID Reader features a compact size, light weight and multi-regional flexibility. It has 4 antenna ports and is ...

Video

Playing with Radio Frequency Identification readers & writers Check out more of my Arduino & Electronics...  [more...]

1 Articles for this topic

 
 
 

RFID Reader ID-12LA (125 kHz) - Karlsson Robotics

RFID Reader ID-12LA (125 kHz)

RFID Reader ID-12LA (125 kHz)

Customer Reviews

Description: RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes...

Read more


Website: http://www.kr4.us

Related topics : 125 khz rfid tag reader / rfid 125 card reader serial output / rfid 125 khz antenna / 125 khz rfid tag / rfid card reader serial output

RFID Reader ID-12LA (125 kHz) | Techshopbd

RFID Reader ID-12LA (125 kHz)

RFID Reader ID-12LA (125 kHz)

Model : SEN-00104

Comments [0 ]

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and...

Read more


Website: https://www.techshopbd.com

Related topics : 125 khz rfid tag reader / rfid 125 card reader serial output / 125 khz rfid tag / rfid 125 khz antenna / rfid card reader serial output

R3-2 125 KHz Low Frequency Readers up to 3 feet - RFID, Inc.

125 KHz Low Frequency Readers

Our R32 line of 125 KHz RFID Readers continues to be by far the most advanced LF hardware on the market since its debut in 2002. Termed "Smart Antennas", these RFID Readers are designed for factory floor identification applications requiring Robust, Rugged, Rapid data capture (hence the R3). RFID Readers operate both...

Read more


Website: http://rfidinc.com

Related topics : rfid lf 125 khz / rfid 125 khz antenna design / rfid 125 khz antenna / low frequency rfid reader / rfid reader antenna design

Introduction of 125 kHz LF RFID Reader (211023)

GAO RFID's 125 kHz LF RFID Reader is fully compliant with ISO18000 standard and is able to read EM4001 compatible format ID cards. It features high receiving sensitivity, low operating current, stable...

Read more


Website: youtube.com

Related topics : rfid lf 125 khz / lf rfid reader / lf rfid readers / rfid 125 khz antenna / low frequency rfid reader

LF 125 kHz | TECTUS Professional RFID Sytem Components and ...

ATEX Zone 1 / IECEx Zone 1 certified Stainless Steel LF 125 kHz Antenna TPA-530-FLE-ES

 

 the ATEX Zone 1 / IECEx Zone 1 certified Stainless Steel LF 125 kHz Antenna TPA-530-FLE-ES is used by system integrators and users to identify ATEX Zone 1 and IECX Zone 1 certified LF RFID transponders together with the stationary ATEX Zone 1 reader TPF-35-EX-45 in hazardous areas.

Industrial Mobile...

Read more

Date: 2017-03-04 01:47:41
Website: http://www.tec-tus.de

Related topics : lf 125 khz rfid tag / lf hf uhf rfid tags / lf hf uhf rfid reader / rfid lf 125 khz / 125 khz rfid tag reader

RFID Reader ID-12LA (125 kHz) | SEN-11827 | ID Innovations

RFID Reader ID-12LA (125 kHz)

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to...

Read more


Website: http://www.hobbytronics.co.uk

Related topics : 125 khz rfid tag reader / rfid 125 card reader serial output / radio frequency identification tags (rfid) / rfid radio frequency identification tags / radio frequency identification (rfid)

RFID Readers | TECTUS Professional RFID Sytem Components ...

Français

RFID Readers

Stationary and Portable RFID readers are available as Industrial- and also as EX certified versions. Desktop- Readers- and Programmers are suitable for safe industrial area. For integration of RFID in own hardware OEM Reader modules and OEM Reader boards are available.

The standard frequency ranges

LF 125 kHz / 134 kHz,

HF /NFC 13,56 MHz and

UHF 860 - 960 MHz

are...

Read more

Date: 2018-01-12 12:07:44
Website: http://www.tec-tus.de

RFID 125 kHz - ifm electronic

RFID antennas

RFID 125 kHz

The RF identification system for 125 kHz enables non-contact reading from and/or writing to RFID transponders (ID tags). The compact read/write heads include, in addition to the antenna, the complete evaluation and the interface to AS-Interface. So the units can be operated directly in the AS-i network. The data is converted into...

Read more


Website: ifm.com

Related topics : rfid transponder 125 khz / 125 khz rfid tag / rfid 125 khz antenna / read write rfid tags / rfid tag writing software

Mobile RFID Reader | TECTUS Professional RFID Sytem ...

MultiPen - 3 in 1 RFID Reader

The MultiPen is an innovative �Mobile RFID/NFC Reader, with capability of� reading UIDs of passive RFID TAGs with various� frequency combinations.�The MultiPen allows to transfer UID reads via Bluetooth to the host-computer (Tablet, Laptop or Smartphone). It is also possible to store the UIDs in the integrated data base of the MultiPen. After connecting via...

Read more

Date: 2018-01-12 06:45:56
Website: http://www.tec-tus.de

Diy rfid reader antenna TurkHub.net

GAO RFID's UHF 860-960 MHz 4 Port Long Range RFID Reader features a compact size, light weight and multi-regional flexibility. It has 4 antenna ports and is ...

Video

Playing with Radio Frequency Identification readers & writers Check out more of my Arduino & Electronics...

Read more


Website: http://turkhub.net

Related topics : rfid uhf long range reader / rfid uhf long range antenna / long range passive rfid reader arduino / designing an uhf rfid reader antenna / uhf rfid reader antenna design

RFID Reader - Mid range (125 kHz) - zeroohm.com

Description Specification Reviews (0) Related Products (5)

RFID Reader - Mid range (125 kHz)

The main purpose of this RFID reader is to identify and track tags attached to object, it does that through the use of...

Read more


Website: https://www.zeroohm.com

Related topics : 125 khz rfid tag reader / rfid 125 card reader serial output / 125 khz rfid tag / rfid reader range / rfid 125 khz antenna

125 kHz RFID tag reader uses FSK to reduce collisions ...

The RFID (radio-frequency identification) system consists of an RFID tag, a reader, and a user-interface computer. The passive RFID tag contains a silicon chip and an LC antenna circuit. The passive tag is energized by an RF field that's transmitted by the reader (interrogation). Therefore, the tag doesn't require any batteries for its operation.

Passive RFID tags are used for animal tagging,...

Read more

Date: 2017-03-04 02:17:28
Website: http://electronicdesign.com

Related topics : 125 khz rfid tag reader / passive rfid tag and reader / rfid active reader passive tag / passive rfid tag reader / rfid tag reader circuit diagram

125 kHz RFID tag reader uses FSK to reduce collisions ...

The RFID (radio-frequency identification) system consists of an RFID tag, a reader, and a user-interface computer. The passive RFID tag contains a silicon chip and an LC antenna circuit. The passive tag is energized by an RF field that's transmitted by the reader (interrogation). Therefore, the tag doesn't require any batteries for its operation.

Passive RFID tags are used for animal tagging,...

Read more

Date: 2019-04-10 21:52:41
Website: electronicdesign.com

RFID frequency ranges - Centre National RFID

RFID frequency ranges

1. The RFID frequency spectrum

RFID is considered as a non specific short range device. It can use frequency bands without a license. Nevertheless, RFID has to be compliant with local regulations (ETSI, FCC etc.)

oLF : 125 kHz - 134,2 kHz : low frequencies,

oHF : 13.56 MHz : high frequencies,

oUHF : 860 MHz - 960 MHz : ultra high frequencies,

oSHF : 2.45 GHz : super high...

Read more


Website: http://www.centrenational-rfid.com

Related topics : lf hf uhf rfid tags / passive rfid tag frequency range / difference between hf lf rfid tags / active rfid tag frequency range / hf rfid tag frequency

RFID transceiver targets 125-kHz apps - Electronic Products

Operating in the 125-kHz frequency range, the MLX90109 RFID transceiver can be used in the design of car immobilizers, portable readers, access control, pet identification, and household appliances. Supply voltage...

Read more


Website: electronicproducts.com

Related topics : rfid 125 khz antenna design / rfid 125 khz antenna / rfid transceiver chip

125 kHz RFID tag reader uses FSK to reduce collisions ...

Contributing Author | Oct 27, 1999

The RFID (radio-frequency identification) system consists of an RFID tag, a reader, and a user-interface computer. The passive RFID tag contains a silicon chip and an LC antenna circuit. The passive tag is energized by an RF field that's transmitted by the reader (interrogation). Therefore, the tag doesn't require any batteries for its operation.

Passive RFID...

Read more

Date: 2017-12-09 22:32:48
Website: electronicdesign.com

LF Antenna Construction (125 to 134 kHz) | All About Circuits

I am attempting to capture the radiated wave from a couple passive RFID tags, one which transmits at 125 kHz and the other at 134 kHz. I need to make a rudimentary AM antenna to detect these...

Read more


Website: forum.allaboutcircuits.com

Related topics : lf 125 khz rfid tag / 125 khz rfid tag / rfid 125 khz antenna / rfid lf 125 khz / passive rfid tag modulation

RFID Reader ID-12LA (125 kHz) - RFID - Wireless - Modules

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This...

Read more


Website: http://www.exp-tech.de

Related topics : radio frequency identification tags (rfid) / rfid radio frequency identification tags / radio frequency identification (rfid) / 125 khz rfid tag reader / rfid 125 card reader serial output

Digitizing Vehicle Manufacturing with RFID Tags | Machine ...

RFID tags provide the automotive industry with assembly tracking tools, thus bringing vehicle assembly into the IoT world.

Carlos Gonzalez | Jan 11, 2018

Radio-frequency identification tags (RFID) have become an essential method of tracking not only shipping products, but also components in manufacturing assembly. They are currently used to control shopping, logistics, warehouses, stock, and...

Read more

Date: 2018-01-12 06:07:33
Website: machinedesign.com

RFID Tags, RFID Labels | Express Corp

Radio frequency identification (RFID) tags are smart barcode tags that transmit data through radio frequencies. Radio waves transmit data from the RFID tag to RFID reader, which then transmits the data to an RFID computer program. Industrial RFID tags are used to track automobiles, machines, and inventory throughout harsh industrial environments.

Active vs. Passive RFID Tags

Active RFID tags are...

Read more


Website: expresscorp.com

Designing an RFID antenna - Hackster.io

Designing an RFID antenna:

Basically I am motivated to replace the antenna on this RFID reader. The reader is really cheap, and fits my porpoise, its recognized as a USB keyboard.

My Idea is to build a new antenna that can be fitted into a PVC tube and have a usb "reading rod". Basically I want to make a new coil with copper cable which area is a rectangle instead of a square.

Hackaday has provided me with some information about this, but nothing useful about antenna modding.

Thanks a...

Read more


Website: https://www.hackster.io

Related topics : 125khz rfid reader antenna design / rfid reader antenna design / rfid 125 khz antenna design / rfid tag antenna design / rfid antenna design

Glossary of RFID, NFC, IoT - SMARTRAC N.V.

Glossary

Active Transponder

A transponder which contains a battery that provides the energy needed to transmit information and receive data.

Contact Card

Device in which the chip must have physical contact with the reader to allow data transmission. The chip must therefore be located on the surface to allow readers to establish contact with the chips and communicate with them.

Contactless...

Read more

Date: 2017-12-10 03:38:42
Website: https://www.smartrac-group.com

RFID Key Fobs Explained – SUMOKEY

YELP

RFID Key Fobs Explained

These RFID systems are categorized by the frequency band in which it operates. Low, High or Ultra-high frequency. However, there are two major categories of RFID systems - Active and Passive, and we are explaining each of their types and frequencies below.�

Common Key Fobs

The common key fobs that are primarily used to access Condos, homes, apartment complexes,�...

Read more


Website: https://sumokey.com

Key Fob Clone Copy and Duplication | sumokey.com

Sale price $79.75

RFID KEY FOBS EXPLAINED

These RFID systems are categorized by the frequency band in which it operates. Low, High or Ultra-high frequency. However, there are two major categories of RFID systems - Active and Passive, and we are explaining each of their types and frequencies below.�

Common Key Fobs

The common key fobs that are primarily used to access Condos, homes, apartment...

Read more


Website: https://sumokey.com

Low-Cost Solution for RFID Tags in Terms of Design and ...

Low-Cost Solution for RFID Tags in Terms of Design and Manufacture

Chi-Fang Huang1

[1] Institute of Communication Engineering, Tatung University, Taiwan

1. Introduction

Even invented and applied initially during the World War II, RFID (Radio Frequency IDentification) technologies [ 1 ] have attracted much attention recently. Precisely speaking, RFID technologies have been applied very widely in...

Read more


Website: intechopen.com

Related topics : rfid tag antenna design and its em simulation based measurement method / low cost low power uhf rfid tag with on chip antenna / rfid tag production cost / hf rfid tag antenna / hf rfid tag antenna design

ePanorama.net - Links

SmartCard Edit/Read/Write Software - for almost any kind of smartcard    Rate this link

Smartcard articles

Java Card Security - How Smart Cards and Java Mix    Rate this link

RFID tags connect smart cars to smart highways - small RF identification (RFID) tags are part of the critical communication link between automobiles and electronically directed "smart" highways and there are also...

Read more


Website: http://www.epanorama.net

ElectricPCB: Creating a RFID Reader From Scratch Part 2

The transmitter is a simple current amplifier, where the transistors Q1 and Q3 will alternately pull the antenna voltage high and low depending on the "control" signal in to the amplifier, thus forcing a high current through the antenna. The important thing to note is that this circuit does not generate any frequency signal on itself, it requires a source that produces the correct frequency, the...

Read more

Date: 2018-09-30 08:08:18
Website: https://electricpcb.blogspot.com

Related topics : rfid 125 khz antenna amplifier / rfid 125 khz antenna design / 125 khz rfid tag reader / rfid 125 khz antenna / design of rfid tag antenna matched to microchip

RFID Reader ID-20LA (125 kHz) - SGBotic Pte Ltd

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna,...

Read more

Date: 2019-04-11 00:58:39
Website: https://www.sgbotic.com

Related topics : radio frequency identification tags (rfid) / rfid radio frequency identification tags / radio frequency identification (rfid) / radio frequency identification card reader / radio frequency identification tags

The Shocking Price of RFID Tags - Advanced Mobile Group

Tweet

With� RFID technology �becoming more affordable by the day, many business owners are considering RFID tags and readers as a way to reduce the time and cost of tracking assets. But how much do these systems really cost? And is RFID technology the right choice for your business? In this article, we'll explore the different types of RFID systems and how much you can expect to pay for...

Read more


Website: http://www.advancedmobilegroup.com

RFID Reader ID-12LA (125 kHz) :: Solarbotics

This is a very simple to use RFID reader module with a built in antenna. Power the module, hold up a card, and get a Serial string output containing...

Read more


Website: https://solarbotics.com

Related topics : rfid 125 card reader serial output / rfid card reader serial output / rfid reader module / rfid 125 khz antenna / rfid card reader serial

RFID TAG - rfenergie.com

RFID TAG

LF RFID

The LF band covers frequencies from 30 KHz to 300 KHz. Regularly LF RFID systems work at 125 KHz, in spite of the fact that there are some that work at 134 KHz. This recurrence band gives a short read scope of 10 cm, and has slower perused speed than the higher frequencies, yet is not exceptionally delicate to radio wave impedance.

LF RFID applications incorporate access control...

Read more

Date: 2018-01-02 06:56:51
Website: http://rfenergie.com

How to interface RFID with 8051 microcontroller ...

MICROCONTROLLER How to interface RFID with 8051 microcontroller

How to interface RFID with 8051 microcontroller

Kiran Manchekar

An�RFID�(Radio-frequency identification and detection) reader is a device which is used to communicate with RFID tags by receiving and transmitting signals. These signals use radio waves for wireless communication.RFID tag is applied to products, individuals or...

Read more


Website: https://theelectronicsproject.blogspot.com

NFC UHF Dual frequency EM4423 RFID hf rfid tags label ...

As a leading RFID company, we are known for our large selection of RFID hardware such as RFID Tags, RFID Card, RFID Inlay, RFID Wristband, RFID key fobs and RFID Readers that cover a large range of frequencies including Active 2.45 GHz, Gen 2 UHF 865-868 MHz, 902-928 MHz, High Frequency 13.56 MHz, and Low Frequency 125 KHz/134 KH--all designed with the leading edge in mind to offer amazing...

Read more


Website: http://www.rfidsolutionglobal.com

Stupid Simple Arduino LF RFID Tag Spoofer -Use Arduino for ...

RFID tags are all over the place. �They're used in building access control systems, passports, inventory tracking . . . � This instructable will show how you can use an Arduino and a few simple components (wire coil, transistor, capacitor, resistor) to make a device that can spoof an 125 KHz (low frequency) RFID tag. �This is version 1, so there are many enhancements that can be made, but...

Read more


Website: http://duino4projects.com

Different Types of RFID System | Centrex Technologies

RFID systems can be broken down by the frequency band within which they operate: low frequency, high frequency, and ultra-high frequency. There are also two broad categories of RFID systems--passive and active. In the sections below we will explore the frequencies and types of RFID systems.

RFID Frequencies

Frequency refers to the size of the radio waves used to communicate between RFID system...

Read more


Website: ctrx.com

The Different Types of RFID Systems | Oprfid.com

RFID systems can be broken down by the frequency band within which they operate: low frequency, high frequency, and ultra-high frequency. There are also two broad categories of RFID systems-passive and active. In the sections below we will explore the frequencies and types of RFID systems.

����RFID Frequencies

����Frequency refers to the size of the radio waves used to communicate...

Read more

Date: 2017-11-14 03:07:10
Website: http://www.oprfid.com

Different Types of RFID Systems | Impinj

TYPES OF RFID SYSTEMS

Now that you know how RFID systems work, it's time to go deeper into the different types of systems available. RFID systems can be broken down by the frequency band within which they operate: low frequency, high frequency, and ultra-high frequency.

There are also two broad categories of systems--passive and active RFID. In the sections below we will explore the...

Read more


Website: impinj.com

Different Types of RFID Systems | Impinj

TYPES OF RFID SYSTEMS

Now that you know how RFID systems work, it's time to go deeper into the different types of systems available. RFID systems can be broken down by the frequency band within which they operate: low frequency, high frequency, and ultra-high frequency.

There are also two broad categories of systems--passive and active RFID. In the sections below we will explore the...

Read more


Website: impinj.com

RFID Coil Antenna, 13.56MHz | RF Solutions

Description:

RFID Coil Antenna, 13.56MHz�

The MicroRWD MF (Mifare) module has been designed to interface to a simple high Q antenna coil of around 1uH inductance together with some capacitor and resistor components. The antenna coil and passive components form the tuned RLC (ResistorInductor-Capacitor) circuit, which is designed to resonate at the 13.56 MHz carrier frequency and have a Q factor...

Read more


Website: https://www.rfsolutions.co.uk

Related topics : rfid 125 khz antenna design / antenna circuit design for rfid / rfid 125 khz antenna / rfid antenna design / rfid coil design

The Different Types of RFID Systems - Bright Alliance ...

Every RFID system can be broken down by the frequency band in which it operates. Whether it is low, high or ultra-high frequency - there are many other categories of RFID systems as well. However, there are two major categories of RFID systems - active and passive, and we are explaining each of their types and frequencies below.

RFID Frequencies

The frequency refers to the size of the radio that...

Read more


Website: http://www.batlgroup.net

GitHub - Wookai/arduino-rfid: A short example of how to ...

README.md

#arduino-rfid

A short example of how to read 125 kHz RFID tags using an Arduino and a RMD6300 RFID module

See a video here on how it works in action [Youtube] ( http://www.youtube.com/watch?v=u8YD3-BrHv0 )

Required hardware

Breadboard, cables, LEDs

How to use

Simply plug the antenna, as well as the power, ground and TX pins of...

Read more


Website: https://github.com

Related topics : rfid 125 khz module for arduino / rfid 125 khz arduino / tag rfid arduino / 125 khz rfid tag / rfid module arduino

RFID Coil Antenna, 125KHz | RF Solutions

Description:

RFID Coil Antenna, 125KHz�

The Micro RWD has been designed to interface to a simple low Q (10-20) antenna coil of around 700uH (micro Henry) inductance operating at a carrier frequency of 125 kHz.

Click links to download:

There are no documents available for this product.

Delivery

No matter where you are, the size of your order or how fast you need it - we have a delivery option for you!

UK Mainland orders: FedEx

All orders within the UK (excluding Scottish Highlands) are sent via FedEx which offers a fast, insured and tracked shipping method. Orders placed before 3pm Mon-Thu will be dispatched the same day for next day delivery*. Orders...

Read more


Website: https://www.rfsolutions.co.uk

Related topics : 125khz rfid antenna coil / 125khz rfid antenna inductance / 125khz rfid antenna / micro rfid antenna / rfid 125 khz antenna design

The New Zealand RFID Pathfinder Group

Basic information about RFID

Introduction of RFID

Radio-frequency identification (RFID) is the wireless use of electromagnetic fields to transfer data, for the purposes of automatically identifying and tracking tags attached to objects. The tags contain electronically stored information. Some tags are powered by electromagnetic induction from magnetic fields produced near the reader. Some types...

Read more


Website: http://www.rfid-pathfinder.org.nz

Improve Your RFID Read Range with these Six Factors

Please let us know if there is ever anything else that we can do to help.

Tom Sky

Hi James,

I am going to make a UHF RFID based medical implant for my project. Could you please give me some ideas about transponder and reader, like which will better solution for this matter?

Thanks

James Thrasher

UHF RFID probably wouldn't be ideal for use in a medical implant since the human body would likely...

Read more


Website: blog.atlasrfidstore.com

Related topics : passive rfid tag and reader / passive rfid tag read range / uhf rfid tag reader / rfid passive tag reader cost / uhf passive rfid tag reader

Radio Frequency Identification (RFID) Frequently Asked ...

What is the Electronic Product Code (EPC)?

Privacy and Data Collection 

General RFID Information

What is automatic identification?

Automatic identification, or auto ID for short, is the broad term given to a host of technologies that are used to help machines identify objects. Auto identification is often coupled with automatic data capture. That is, companies want to identify items, capture...

Read more


Website: http://www.aimglobal.org

Related topics : rfid tags and readers cost / cost of rfid readers and tags / radio frequency identification technology (rfid) / rfid tag and reader price / rfid tag and reader circuit

Which RFID Frequency is Right for Your Application?

Which RFID Frequency is Right for Your Application?

October 29, 2012

By Shain Armstrong 37 Comments

LF, HF, and UHF

Similar to how a radio must be tuned to different frequencies to hear different channels, RFID tags and readers have to be tuned to the same frequency in order to communicate. There are several different frequencies an RFID system can use.  Generally, the most common are

Low...

Read more


Website: blog.atlasrfidstore.com

Radio frequency identification (RFID): Proximity and ...

Many campuses utilize proximity cards (also called prox cards) to control access to buildings and facilities. Typically, these have been a stand-alone ID card separate from the official campus ID. Today, however, more and more institutions are opting to merge the two cards, adding the proximity technology to the official ID. While not yet commonplace in the higher education environment,...

Read more


Website: secureidnews.com

Related topics : radio frequency identification card reader / rfid proximity card reader / rfid card reader system / radio frequency card reader / rfid card reader frequency

What is RFID Technology - About RFID (Radio Frequency ...

Purpose of Radio frequency Identification and Detection system is to facilitate data transmission through the portable device known as tag that is read with the help of RFID reader; and process it as per the needs of an application. Information transmitted with the help of tag offers location or identification along with other specifics of product tagged - purchase date, color, and price. Typical...

Read more


Website: https://www.engineersgarage.com

The simplest possible RFID emulator | T4F

The simplest possible RFID emulator

 

Before reading this section, you should check first " RFID for nerds and hobbyist ".

Keep in mind that this information applys for low frequency RFID. Several changes

When looking for a low frequency RFID emulator for security testing purposes, you can find several designs out there. However, their complexity can make you think twice before building one.

Is...

Read more


Website: http://www.t4f.org

Related topics : low frequency rfid reader / high frequency rfid reader module / rfid tag emulator / low frequency rfid tag / rfid reader read range

5m RFID Antenna Capture Mat | RFID Chip Timing | FinishLynx

The 5-meter RFID capture mat is a sturdy ground device that detects athlete RFID timing tags for lap, split, and finish timing. �The capture mat (also available in a 2.5 meter �size) connects with Lite or Elite Tag Readers to create a powerful and reliable RFID sports timing solution. Multiple mats can even be combined to create a single stitched mat to cover wide lanes and finish lines. �IPICO RFID detection mats are strong, weather-proof, and durable; they can be soaked, trampled, and even driven-over without affecting the antennas.

Product Data

Description

The IPICO antenna mats contain separate...

Read more


Website: http://www.finishlynx.com

Related topics : 125 khz rfid tag reader / 125 khz rfid tag / rfid tag detection / rfid tag detection range / rfid tag antenna