xportal extended range test.wmv
Follow up from initial test reading RFID tags in a wallet. These tests were using the xPortal as before with Monza 4 powered RFID tags. This shows how passive RFID can be used to monitor secure facilities or a customer loyalty program.
From: rfiddrew
Related topics : passive rfid tag uses / passive rfid tag security / rfid tags uses / how to test rfid wallet / programing rfid tags
RFID Based Toll Plaza System
In this project we are going to design a RFID based toll plaza system for security purposes. So this system open gates and allow people only with the authorized RFID tags. The authorized tags holder ID’s are programmed in to the ATMEGA Microcontroller and only those holders are allowed to leave or enter the premises. For circuit diagram and code, please visit: http://circuitdigest.com/microcontroller-projects/rfid-based-toll-plaza-system
From: Circuit Digest
Related topics : rfid based security system / rfid tag security system / rfid based projects / rfid gate system / rfid tagging system
AutoSlide: Programming your RFID/Smart Tag Set
Here's a video on programming your RFID/Smart Tag Sets to your unit.
Please Note:
- At 1:20 David starts discussing the unit and set up, and at 1:54 David goes through Pet Mode set up.
- Each RFID Set can handle a maximum limit of three tags at once.
- The unit used in this video is upside down, AKA floor level, for testing purposes.
- If your dog lays down in front of the door often then we recommend positioning the RFID Sensor high enough so that the sensor will only be triggered when the...
From: Autoslide USA Tech Help
Related topics : programming rfid tags / rfid tag position sensor / rfid smart tags
how to use our RFID products
how to use our desk device program our rfid products,include:mid range reader,long range parking reader,door controller,alarm controller,rfid tags,you will find our rfid is easy to use.if you need more:www.jutairfid.com or write us email:sales@nobleled.com
From: Liao Alan
Related topics : rfid tag reader long range / products using rfid / rfid door controller / rfid tag uses
car door unlocking using Arduino pro mini and RFID Tag
car-door-unlocking-using-Arduino pro mini and RFID Tag
Simple projects based on Arduino Pro-Mini 328p
runs on 5 volts and 3.3v which is fetched from Installed breadboard power supply for arduino.
System comprises of RC-522 as RFID Tag reader, which reads and saves the 1st Tag as master card and enters programming mode on 1st start up.
After that 1st Card can be used to enter programming mode and RFID Tags/Keyfobs/devices with NFC TAG can be added or removed if previously added.
Used a Relay...
From: ghpk
Related topics : rfid tag reader arduino / rfid door arduino / rfid tag uses / mini rfid tag / rfid tag reader system
Metalcraft's Predator - RFID Converting
Our RFID converting equipment - The Predator - allows us to construct, program and verify RFID tags all in one pass. From asset tags to wristbands to windshield tags, this equipment allows us to pass time and cost savings onto our customers.
Visit our website for more information on our RFID products: http://www.idplate.com/category/rfid-tags-rfid-labels-and-asset-tags
E: metalcraft@idplate.com
P: 800.437.5283 -OR- 641.423.9460
From: Metalcraft
Related topics : rfid asset tags cost / rfid tag production cost / rfid tag label / programing rfid tags
How to program RFID tags into Knight Guard G10
The tutorial is suitable for Knight Guard (G10) alarm system, to program the RFID tags, you should note the following things:
1. Program RFID tags into zone 35-28
2. Each zones can enroll max.4 pieces RFID tags
3. Swipe once to Arm, swipe twice to Disarm
Product info: http://www.hkvstar.com/item/wireless-alarm-system-with-hd-camera-knight-guard.html
From: Jackie
Related topics : program rfid tag / rfid tagging system / rfid programming
RFID Music Player
I used a Sonmicro SM130 read/write module to read and write Mifare RFID tags, and talk to Processing. My Processing program plays different songs when different tags are detected.
Sonmicro RFID Reader Library for Processing by Tom igoe et al
Music by Pablo Casals - Bach's Cello Suite No.1 in G, BWV 1007 - I.Prelude
Coldplay - The Scientist
From: Miu Ling Lam
Related topics : read write rfid tags / rfid read write module / write rfid tag / programming rfid tags / rfid tag and reader
Subculture Music/Clothes with Radio Frequency Tags (RFID)
Sown into each piece of clothing is a programed RFID tag which plays music linked with each clothings subculture - Ted, Mods, Rocker and Punk.
From: moyathomas
Related topics : rfid clothing tag / programing rfid tags / rfid tag frequency / radio frequency tags
How to program additional RFID devices to the Gun Box models - Orders placed AFTER 02/19/17
This video demonstrates how to program an additional RFiD tag into The Gun Box 2.0 + Echo Models. RFiD tags that can be programmed are key cards, fobs, rings, and wristbands for orders placed AFTER 02/19/17
From: The Gunbox
Related topics : programming rfid tags / rfid key fob programming